เครื่องมือวัดละเอียด

KEN-518-1100K เกจวัดดอกสว่าน (ดอกสว่าน No.1-60) (11/16 - 1/2 in.) KENNEDY No.1-60 IMPERIAL DRILL GAUGE

KEN-518-0800K เกจวัดมุม KENNEDY SCREW CUTTING GAUGE

Designed for measuring flat based recesses. Consisting of a precision ground steel rule and body which are positioned at 90° to each other. The body has precision ground locating faces, with a knurled adjusting/securing nut. Rule Length: 150mm (6")

Ground steel with graduations from 0° - 180° in both directions for fast and accurate measurements. When the rule is positioned to 90° on the protractor it then provides accurate measurements of depth. Rule Length: 150mm (6")

Round End - Rigid Blade Spring tempered rigid steel blades. 150mm/6” = 19mm blade width. Other lengths = 25mm blade width. With hanging hole. Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless. Rigid Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm. Rigid Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.

Square End - Flexible Blade Spring tempered flexible steel blades. 12mm blade width. Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: /- 0.2mm full scale. Constant at 20C. Flexible Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm. Flexible Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch, every 8/64”, and every 4/32”.

Round End - Rigid Blade Spring tempered rigid steel blades. 150mm/6” = 19mm blade width. Other lengths = 25mm blade width. With hanging hole. Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless. Rigid Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm. Rigid Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.

Round End - Flexible Blade Spring tempered flexible steel blades. 12mm blade width. With hanging hole. Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: /- 0.2mm full scale. Constant at 20C. Flexible Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm. Flexible Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.

Spring tempered stainless steel blades. 13mm blade width with pocket clip/depth gauge slide. Reverse side is marked with 1/64” to mm conversion table. 12mm blade width. Can also be used as a depth gauge. EEC Class 1.

Contents: 6" spring divider, 6" internal caliper and 6" external caliper.

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.

Adjustable Point Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

100mm (4"), 150mm (6") Adjustable Point Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

Made from hardened steel and precision ground. Supplied with three fully adjustable blades. One plain, parallel blade for use as a conventional engineer’s square, 30° and 45° bevel edged blade for checking angles, and a narrow blade graduated metric and imperial.

Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade. Squareness tolerance: 75, 100 and 150mm = ±0.030mm. 225 and 300mm = ±0.040mm.

These are called taper gauges only because of their shape - they do not measure tapers. They are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered steel. 0.1mm increments. Rustless. Constant at 20°C. Satin chrome anti glare finish. Permanent black figures and graduations.

This precision tool has a line of chords scale for use in measuring angles and in determining the circumference of a circle from a diameter measurement. The rule is flexible and rustless with deep etched figures filled with black ink.

This folding steel rule is manufactured from spring tempered stainless steel with a polished finish and it is both flexible and rustless. A strong, solid performer for the engineer. Subdivided to mm, figured cm one side. Inch - subdivided to 1/16", figured 1" other side.

Cooling System & Radiator Cap Pressure Tester Designed for the pressure testing of cooling systems and radiator caps up to 35psi (2.5bar).

ชุดเกจวัดรูใน TELESCOPIC GAUGE SET (6-PCE)